The Equalize screen can be accessed from the more menu on the Measure screen. It is the main interface for automatic equalization / room correction. The plot area displays the filters used to correct a saved measurement to a target curve. The lower toolbar contains controls related to equalization.
The predicted magnitude measurement is shown in cyan. After applying the correction filters, the measured magnitude response should be close to this.
The filters needed to correct the saved measurement (grey) to the target curve (yellow) are shown in magenta.
Tap to show the individual filter parameters. HouseCurve’s biquad filters are based on the Audio EQ Cookbook by Robert Bristow-Johnson. Where Frequency is the center frequency of the filter. Gain is in dBFS and Q is the width of the filter (for peaking biquad Q is a “proportional Q”).
Tap to show the Equalize Setup screen.
Tap to show the Filter Export screen.